Symcom Pump Saver Plus 233-P

Description

PumpSaver Plus 233P 1/3HP – 3HP Pump Monitor

 

The Model 233P single-phase PumpSaver®Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The PumpSaver®Plus Model 233P protects 230 volt, 2 or 3 wire, 1/3 to 3 hp pumps.

 

Manufacturer: SymCom

Model: 233 P

Product Information:

A calibration adjustment allows the Model 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the PumpSaver®Plus deactivates its output relay and directly disconnects the pump motor. The PumpSaver®Plus then begins its user-selectable “Restart Delay” (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the PumpSaver®Plus reactivates its output relay and allows the pump to turn back on.

 

An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).

 

NOTE:  The PumpSaver®Plus models have a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70-90% of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, you increase the sensitivity closer to the 90% mark, or if you have a very heavy producing well, you would decrease the sensitivity around the 70% mark.

 

Application-Single Phase Only:

• All submersible pumps, regardless of motor manufacturer
• Centrifugal pumps
• Circulating pumps
• Cooling pumps
• Environmental pumps
• Residential water wells
• Commercial water wells
• Irrigation wells
• Golf course systems

Protects From:

• Dry well (run dry condition)
• Flow restrictions (dead head)
• Over current (jammed impeller)
• Over voltage
• Under voltage
• Rapid cycling

Features:

• Ideal for submersible pumps
• State-of-the-art pump protection
• Infrared LED communication to SymCom’s Informer
• UL Listed
• Made in US
• Does not include enclosure