Your #1 Source For Well Pumps, Control Boxes & Well Tank Accessories

Symcom Pump Saver Plus 233-P

PumpSaver Plus 233P 1/3HP – 3HP Pump Monitor

 

The Model 233P single-phase PumpSaver®Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The PumpSaver®Plus Model 233P protects 230 volt, 2 or 3 wire, 1/3 to 3 hp pumps.

 

Manufacturer: SymCom

Model: 233 P

Product Information:

A calibration adjustment allows the Model 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the PumpSaver®Plus deactivates its output relay and directly disconnects the pump motor. The PumpSaver®Plus then begins its user-selectable “Restart Delay” (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the PumpSaver®Plus reactivates its output relay and allows the pump to turn back on.

 

An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).

 

NOTE:  The PumpSaver®Plus models have a sensitivity adjustment for the dry-well trip point. After calibration is done, you can adjust the sensitivity for the dry-well/dead-head trip point from 70-90% of the full load. This makes the unit even more adaptable to varying pumping applications. If you have a very low producing well, you increase the sensitivity closer to the 90% mark, or if you have a very heavy producing well, you would decrease the sensitivity around the 70% mark.

 

Application-Single Phase Only:
  • All submersible pumps, regardless of motor manufacturer
  • Centrifugal pumps
  • Circulating pumps
  • Cooling pumps
  • Environmental pumps
  • Residential water wells
  • Commercial water wells
  • Irrigation wells
  • Golf course systems

Protects From:
  • Dry well (run dry condition)
  • Flow restrictions (dead head)
  • Over current (jammed impeller)
  • Over voltage
  • Under voltage
  • Rapid cycling

Features:
  • Ideal for submersible pumps
  • State-of-the-art pump protection
  • Infrared LED communication to SymCom’s Informer
  • UL Listed
  • Made in US
  • Does not include enclosure

Regular Price
$325.00
Sale Price
$325.00
Regular Price
Sold Out
Unit Price
per

Shipping calculated at checkout.
Only 1 left!

Symcom Pump Saver Plus 233-P

Regular Price
$325.00
Sale Price
$325.00
Regular Price
Sold Out
Unit Price
per